Yealink SIP T2 Series Provisioning Manual page 84

Yealink IP Phones Auto Provisioning Guide
Parameter
syslog.server
syslog.log_level
78
Permitted
Values
0-Local
1-Server
The default value is 0.
It takes effect after a reboot.
It configures the IP address or domain name of the
syslog server when exporting log to the syslog
server.
Example:
IP address or
syslog.server = 192.168.1.50
domain name
The default value is blank.
It takes effect after a reboot.
Note: It works only if the value of the parameter
"syslog.mode" is set to 1 (Server).
It configures the detail level of syslog information
to be exported.
0-system is unusable
Integer from 0
1-action must be taken immediately
to 6
2-critical condition
3-error conditions
4-warning conditions
Descriptions
Settings->Configuration->Server
Name
Settings->Configuration->System Log
Level
Web Setting Path