Yealink SIP T2 Series Provisioning Manual page 85

Parameter
auto_provision.power_on
auto_provision.pnp_enable
auto_provision.pnp_domain_name
Permitted
Values
5-normal but significant condition
6-informational
The default value is 3.
It takes effect after a reboot.
It triggers the power on feature to on or off.
0-Off
1-On
0 or 1
If it is set to 1(On), the IP phone will perform an
auto provisioning process when powered on.
The default value is 1.
It triggers the Plug and Play (PnP) feature to on or
off.
0-Off
1-On
0 or 1
If it is set to 1(On), the IP phone will broadcast PnP
SUBSCRIBE messages to obtain a provisioning
server address during startup.
The default value is 1.
IP address or It configures the IP address or domain name of the
domain name SIP URI included in the PnP SUBSCRIBE messages.
Descriptions
Settings->Auto Provision->Power On
Settings->Auto Provision->PNP Active
Appendix
Web Setting Path
79