Yealink SIP T2 Series Provisioning Manual page 77

Parameter
wui.http_enable
wui.https_enable
network.port.http
network.port.https
Permitted
Values
It enables or disables the user to access web user
interface of the IP phone using the HTTP protocol.
0-Disabled
0 or 1
1-Enabled
The default value is 1.
It takes effect after a reboot.
It enables or disables the user to access web user
interface of the IP phone using the HTTPS protocol.
0-Disabled
0 or 1
1-Enabled
The default value is 1.
It takes effect after a reboot.
It configures the HTTP port for the user to access
web user interface of the IP phone using the HTTP
Integer from 1
protocol.
to 65535
The default value is 80.
It takes effect after a reboot.
It configures the HTTPS port for the user to access
Integer from 1
web user interface of the IP phone using the HTTPS
to 65535
protocol.
Descriptions
Network->Advanced->Web
Server->HTTP
Network->Advanced->Web
Server->HTTPS
Network->Advanced->Web
Server->HTTP Port (1~65535)
Network-> Advanced->Web
Server->HTTPS Port (1~65535)
Appendix
Web Setting Path
71