Yealink IP Phones Auto Provisioning Guide
Yealink IP phones allow you to customize the logo displayed on the LCD screen. Logo is
not applicable to SIP-T48G IP phones.
The following table lists the supported logo file format and resolution for SIP-T22(P) IP
phones:
Phone Model
SIP-T22(P)
For more information on customizing a logo file, refer to
PictureExDemo
You can customize a *.dob logo file, upload the logo file to the provisioning server and
then specify the access URL in configuration files:
####################################################
##
####################################################
#Specify the access URL of the custom Logo File.
lcd_logo.url =
For example, enter "tftp://192.168.1.100/logo.dob" in the "lcd_logo.url =" field. During
the auto provisioning process, the IP phone connects to the provisioning server
"192.168.1.100", and downloads the logo file "logo.dob".
To use the custom logo, you also need to configure the following parameter:
#Configure the logo mode.
#0-Off, 1-System logo, 2-Custom logo
phone_setting.lcd_logo.mode = 2
After auto provisioning, you will find that the custom logo or text logo appears on the
LCD screen.
#Delete all custom logo files.
lcd_logo.delete = http://localhost/all
For more information on these parameters, refer to
Parameters in CFG Files
Yealink IP phones allow you to upgrade firmware manually via web user interface, or
upgrade firmware in batch via auto provisioning.
The following table lists the firmware name for the phone model (X is replaced by the
actual firmware version):
12
Logo File Format
on page 53.
Configure the custom Logo File
on page
55.
.dob
<=132*64 2 gray scale
Customizing a Logo File Using
Description of Configuration
Resolution
##