Yealink SIP T2 Series Provisioning Manual page 88

Yealink IP Phones Auto Provisioning Guide
Parameter
auto_provision.repeat.minutes
auto_provision.dhcp_option.enable
auto_provision.dhcp_option.list_user_options
82
Permitted
Values
0-Off
1-On
If it is set to 1 (On), the IP phone will perform an
auto provisioning process repeatedly.
The default value is 0.
It configures the interval (in minutes) for the IP
phone to perform an auto provisioning process
repeatedly.
Integer from 1
to 43200 The default value is 1440.
Note: It works only if the value of the parameter
"auto_provision.repeat.minutes" is set to 1 (On).
It triggers the DHCP Option feature to on or off.
0-Off
1-On
0 or 1
If it is set to 1(On), the IP phone will obtain the
provisioning server address by detecting DHCP
options.
The default value is 1.
Integer from
It configures the custom DHCP option for
requesting provisioning server address.
128 to 254
Descriptions
Settings->Auto
Provision->Interval(Minutes)
Settings->Auto Provision->DHCP
Active
Settings->Auto Provision->Custom
Option(128~254)
Web Setting Path