Parameter
zero_touch.wait_time
(only applicable to SIP-T22(P) IP phones)
watch_dog.enable
voice.vad
Permitted
Values
For more information, refer to
19.
It configures the duration time (in seconds) for the
IP phone to display Zero Touch screen during
startup. You can press the OK soft key to enter
Integer from 1
configuration screen or the Cancel soft key to exit
to 100
Zero Touch screen.
The default value is 5.
It enables or disables the Watch Dog feature.
0-Disabled
1-Enabled
0 or 1
If it is set to 1 (Enabled), the IP phone will reboot
automatically when the system is broken down.
The default value is 1.
It enables or disables VAD (Voice Activity
Detection) feature on the IP phone.
0-Disbaled
0 or 1
1-Enabled
The default value is 0.
For more information on VAD, refer to Yealink IP
Descriptions
Zero Touch
on page
Settings->Auto Provision->Wait
Time(0~100s)
Settings->Preference->Watch Dog
Settings->Voice->Echo Cancellation
->VAD
Appendix
Web Setting Path
85