Yealink SIP T2 Series Provisioning Manual page 73

Parameter
network.pc_port.speed_duplex
network.vlan.internet_port_enable
Permitted
Values
4-Half Duplex 100Mbps
5-Full Duplex 1000Mbps (only applicable to
SIP-T48G IP phones)
The default value is 0.
It takes effect after a reboot.
It configures the transmission method of the PC
(LAN) port.
0-Auto Negotiate
1-Full Duplex 10Mbps
2-Full Duplex 100Mbps
3-Half Duplex 10Mbps
0, 1, 2, 3, 4 or 5
4-Half Duplex 100Mbps
5-Full Duplex 1000Mbps (only applicable to
SIP-T48G IP phones)
The default value is 0.
It takes effect after a reboot.
It enables or disables VLAN for the Internet (WAN)
port.
0 or 1
0-Disabled
1-Enabled
Descriptions
Network->Advanced->Port Link->PC
Port Link
Network->Advanced->VLAN->WAN
Port->Active
Appendix
Web Setting Path
67