Chapter Four Setup Of Sata Hostraid Chapter Four Setup Of Sata Hostraid; How To Enter Into The Confi Guration Interface Of Sata Hostraid; Application Of Control Keys; Setup Of Sata Hostraid - Inspur Yingxin NF5280M2 Manual

Chapter Four Setup of SATA HostRAID Chapter Four Setup of SATA HostRAID
This chapter mainly introduces the confi guration of controller HostRAID of main-
board Intel SATA and its application method. If the server you purchased does not use
SATA HostRAID, you can not refer to this chapter.
4.1 How to Enter into the Confi guration Interface of SATA HostRAID 4.1 How to Enter into the Confi guration Interface of SATA
1. During the process of system start, the screen will present:
Press <CTRL-I> to enter Confi guration Utility...
2. At this time, press <Ctrl> <I>, and enter into the confi guration interface of
SATA HostRAID.

4.2 Application of Control Keys

4.2 Application of Control Keys
Press key
<↑><↓>
<TAB>
<Enter>
<Esc>

4.3 Setup of SATA HostRAID

4.3 Setup of SATA HostRAID
After entering into the confi guration interface of SATA HostRAID, it will display
the list information of menu, hard disk information connected with SATA controller (port
number of hard disk, model of hard disk, hard disk capacity and whether the hard disk
is volume member etc.), the existing RAID volume information (including volume ID
No., name, RAID class, capacity, status, bootable information), as shown in the follow-
ing picture:
Description
Move the cursor in different menus or change
the options of menu.
Select the next menu confi guration item.
Select menu.
Exit the menu or return to the last menu from
the submenu.
19
HostRAID