Chapter Four Sata Raid Setup; How To Enter The Confi Guration Interface Of Sata Hostraid; Control Key Application; Sata Hostraid Confi Guration - Inspur NP3060 Manual

Chapter Four SATA RAID Setup

This chapter mainly introduces the confi guration of onboard Intel SATA controller
HostRaid and its application method. If the server you purchased does not use onboard
SATA HostRaid, you can not refer to this chapter.
4.1 How to Enter the Confi guration Interface of SATA HostRaid
1. During boot, the screen will display:
Press [CTRL-I] to enter Confi guration Utility...
2. Press [Ctrl][I] to enter SATA HostRaid confi guration interface.

4.2 Control Key Application

Key Description
↑↓ For moving cursor and modifying menu option value in different menus
TAB For selecting the next menu confi guration item
Enter For selecting menu
Esc For exiting menu or back to the previous menu from submenu
4.3 SATA HostRaid Confi guration
After entering the SATA HostRaid configuration interface, these information
will pops out, including the menu list information, the information of the HDDs
connected to the SATA controller (HDD port number, HDD model, HDD capacity and
whether the HDD is part of the volume, etc), the existing RAID volume information
(including volume ID number, name, RAID level, capacity, state and whether can boot
information), as show in the below picture.
Chapter Four SATA RAID Setup
21