Engine Oil Filter; Recommended Products - APRILIA RS4 125 Service Station Manual

Hide thumbs Also See for RS4 125:
Table of Contents

Advertisement

Maintenance
Drain the oil into the container; allow
several minutes for oil to drain out com-
pletely.
Remove any metal scrap attached to
the drainage plug (2) magnet.
Check and, if necessary, replace the
drainage plug (2) sealing washer.
Screw and tighten the drainage plug
(2) to the prescribed tightening torque.
Pour the prescribed quantity of engine
oil into the filling opening (1).

Recommended products

ENI I-RIDE PG 5W - 40 Engine oil
SAE 5W - 40. As an alternative for recommended
oils, top-branded oils that meet or exceed the re-
quirements of CCMC G-4 A.P.I. SG specifications
can be used.
Characteristic
Engine oil
1,200 cm³ (73.23 cu.in)
Screw the filler plug (1).
Start the engine and let it at idle speed for about a minute to allow the oil circuit to get filled.
Check the oil level and refill if necessary.
TIGHTEN UP THE FILLER CAP AND MAKE SURE THE OIL DOES NOT SEEP.
CHECK REGULARLY THAT THERE ARE NO LEAKS IN THE CRANKCASE COVER GASKET.
DO NOT RIDE THE MOTORCYCLE WITH INSUFFICIENT LUBRICATION OR WITH CONTAMINA-
TED OR INCORRECT LUBRICANTS AS THIS ACCELERATES THE WEAR AND TEAR OF THE
MOVING PARTS AND CAN CAUSE IRRETRIEVABLE DAMAGE.

Engine oil filter

Remove the fairing lug beforehand and empty the engine oil.
MAIN - 54
RS4 125

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents