RS4 125
Electrical system
TABLE J6
32. Horn cable: the horn cable must be secured
with the two indicated clamps.
33. Five clamps for fixing horn cable, stand sensor
cable, neutral cable.
34. Neutral cable.
35. Stand sensor cable.
TABLE K1 - Lambda probe and engine oil sen-
sor cable run
36. Rubber clamp.
37. Lambda probe.
38. Oil bulb.
CAUTION
CHECK CORRECT INSERTION OF THE HOOD ON THE EN-
GINE OIL BULB (38).
THE LAMBDA PROBE CABLE (37) MUST BE POSITIONED
WITH A WIDE RADIUS BEND. PAY CLOSE ATTENTION TO
THE MOVEMENTS OF THE CABLE IN ORDER TO AVOID
DAMAGING IT.
ELE SYS - 83