Vehicle Preparation; Removing The Engine From The Vehicle - APRILIA RS4 125 Service Station Manual

RS4 125

Vehicle preparation

•
Rest the vehicle on its stand
•
Support the vehicle rear part using belts and hoist.
•
Drain off the cooling system.
•
Beforehand, remove the lug, the side fairings, the battery, the fuel tank, the side fairings,
the drive chain, the air filter box, the radiator and the expansion tank.
•
Position an under-sump stand that will be supported on the lower side of the engine.
See also
Air box
Side fairings
Removing the expansion
tank
Removing the
radiator
Coolant replacement
Fuel tank
Lower cowl

Removing the engine from the vehicle

•
Prepare the vehicle as described.
•
Disconnect the quick coupler.
•
Loosen the clutch adjuster screw.
See also
Engine from vehicle
ENG VE - 127