Braking system
IF THE BRAKE LEVER STARTS WITHOUT THE CALLIPER
IT MAY BE NECESSARY TO CARRY OUT THE CORRE-
SPONDING BLEEDING.
Front brake pump
•
Unscrew and remove the screw and,
by disconnecting the hoses, collect the
brake oil in the tank, in an adequate
container.
•
Unscrew and remove the two U-bolt
fixing screw at the handlebar and slide
off the front brake pump tank.
•
During the refit, carry out the described
operations, in reverse order, tightening
the screws to the prescribed torque.
Rear brake pump
BRAK SYS - 260
RS4 125