RS4 125
Footrest
PASSENGER FOOTREST
The following procedures only refer to one foot-
rest, but they are applicable to both.
•
Remove the tail fairing.
•
Unscrew and remove the two fixing
screws.
•
Remove the passenger footrest.
See also
Tail guard
Side fairings
The following operations only refer to one fairing,
but they apply to both.
•
Rest the vehicle on its stand.
•
Remove the side fairing.
•
Unscrew and remove the two screws
(1) and collect the corresponding
washers.
•
Unscrew and remove the screw (2) and
collect the washer.
•
Remove the rivet (3).
•
Working on the front side of the vehicle,
remove the three rivets (4).
•
Loosen and remove the screw (5).
•
Sliding it off the fixing tongues (6) and
paying attention to the integrity of the
plastic parts, remove the fairing.
Bodywork
BODYW - 281