Front Brake Calliper - APRILIA RS4 125 Service Station Manual

RS4 125
Installing
•
Place the complete calliper on the spe-
cific lodging on the swingarm.
•
Connect the drive chain after position-
ing the wheel and insert the retaining
pin
•
Insert the washer, the nut and fix the
pin at the prescribed torque
•
Connect the braking system line to the
calliper and proceed with bleeding.

Front brake calliper

CAUTION
THE MOTORCYCLE MAY BE FITTED WITH AN A.J.P. OR J.JUAN BRAKING SYSTEM.
THE PROCEDURES FOR REMOVING AND INSTALLING THE BRAKE CALLIPER ARE IDENTICAL
key:
A) A.J.P. Brake calliper
B) J.JUAN Brake calliper
Removal
•
Carry out the drainage of the front braking system.
•
Unscrew the screw (1) and slide off the brake oil pipe.
Braking system
BRAK SYS - 251