Installing; Pinion; Swingarm Pin - APRILIA RS4 125 Service Station Manual

Chassis

SWINGARM PIN

With a dial gauge check if the pin eccentricity ex-
ceeds the limit value. Otherwise, replace the pin.
Maximum pin eccentricity: 0.3 mm (0.01 in)

Installing

•
To install the swingarm follow the operations described for removal in reverse order, being
careful to tighten the ring nuts, nuts and screws to the prescribed torque.

Pinion

pos. Description
1 Pinion retainer nut
2 Pinion cover fixing screw
3 TCEI Screws pinion retainer
CHAS - 234
L
EVERS
Type Quantity
M12x1.25 1
TEF M5x16 2
M5x10 2
RS4 125
Torque
30 Nm (22.12 lb ft) Loctite 270
4 Nm (2.95 lb ft) Maximum torque:
5.0 Nm (3.68 lb ft)
4 Nm (2.95 lb ft) Maximum torque:
5.0 Nm (3.68 lb ft) -
Loct. 270
Note