Front Side; Wiring Diagram - APRILIA RS4 125 Service Station Manual

RS4 125
•
Check the fuel pump connection - CENTRAL SECTION, TABLES B-N1-N4.
•
Regulator connector - FRONT SECTION, TABLE H.
•
Check the chassis-engine cable clamp - CENTRAL SECTION, TABLES I1-I2.
•
Check the flywheel connection - FRONT SECTION, FRONT TABLE I.
•
Check the Lambda connection (with security lock) - CENTRAL SECTION, TABLE K2.
•
Check correct running of the lambda probe cable - CENTRAL SECTION, TABLE K1.
The connectors in the list are circled in "green" in the different pictures.The listed connectors
are considered more critical than the others because their disconnection could cause the ve-
hicle to stop or malfunction. Obviously, the correct connection of the other connectors is also
important and essential for proper vehicle operation.
It is also important and essential that the instructions regarding the routing and fixing of the cable har-
ness in the various areas are followed meticulously in order to guarantee functionality and reliability.

WIRING DIAGRAM

Ensure that you have the most up to date electrical circuit diagram, downloading it from the network.
Electrical circuit diagrams RS4 125 MY2011 - 898459.
The installation is shown on the three ideal divi-
sions of the vehicle:
1. Front section
2. Central section
3. Rear section

Front side

A TABLES - FRONT HEADLIGHT ASSEMBLY
TABLE A1 - Pre-fitting
1. Daylight running light (5W).
2. Cable guide.
3. Lights relay
4. Low beam light
5. Headlight cable harness.
6. High beam light
Electrical system
ELE SYS - 67