Network Configuration; Basic Configuration; Pppoe Settings; Ddns Settings - HIKVISION DS-9500 Series User Manual

User Manual of DS-9500 Series NVR

9.5 Network Configuration

9.5.1 Basic Configuration

Select
Configure the network according to the actual situation. If
there is DHCP server in the network, enable "Obtain Auto"
and reboot the device to get the IP address under this network
segment automatically.
Select "Advance" to enter advanced configuration. You can
configure preferred DNS server1 and spare DNS server2, IP
address of alarm host and IP server.
Parameters
DNS1 DNS2
Alarm host
IP sever

9.5.2 PPPoE Settings

Select
Enable PPPoE by ticking
password, then save the changes and reboot the device to
make the parameters become effective.
If succeed to dial, the current IP address will be displayed in
the blank "DDNS IP".

9.5.3 DDNS Settings

Adopting DDNS function can solve the problems caused by dynamic IP.

Preferred and spare DNS server
Alarm signal can be uploaded to the IP address automatically
IP address of IP server

, input the user name and
51
Description