HIKVISION DS-9500 Series User Manual page 41

User Manual of DS-9500 Series NVR
Figure 9.4
Select one camera in the list and click to finish the selection.
Then you can change IP address, sub mask or user name, password in the menu on the right, and click "Modify" to
confirm.
IP camera
Manually Add
Select a Channel No. to enable IP camera Config menu shown on the right.
Input the IP address, port, user name and password, click "Modify" to finish adding an IP camera that will be listed
in the IP Camera Information area.
Clicking Reset button will restore the configurations of IPC back to the previous ones.
Clicking button will delete the selected IP camera.
38