Network Configuration By Hyper Terminal - HIKVISION DS-9516NI-S-1TB User Manual

Figure 2.1.4
Step5: Disconnect and save connection.
According to the tips, disconnect and save "HK" for the next time. After saving, there will be a new "Hyper Terminal"
item established in the program group "Start"-> "Accessories"->"Communications"->"Hyper Terminal". "Connection"
names of all Hyper Terminal are included. You can see an icon named as "HK" here.

2.2 Network Configuration by Hyper Terminal

Enter Hyper Terminal
Click "Start"->"Programs"->"Accessories"->"Communications"->"Hyper Terminal"->"HK", then the Hyper Terminal
interface will appear as figure below. Type "Enter", and the prompt "[root@dvrdvs/]#" will appear which means
connection between RS232 interface of PC and RS232 interface of NVR is established successfully by Hyper Terminal.
The following operation commands are to accomplish the parameters setup in the prompt.
13