Video Tampering - HIKVISION DS-9500 Series User Manual

User Manual of DS-9500 Series NVR

9.4.4 Video Tampering

Note:
This function is only available on IP cameras from Hikvision.
Step1: Select the channel number for video tampering.
Select
Step2: Enable "Video Tampering Alarm" to activate settings
of "Area Settings", "Arm Schedule" and "Linkage".
Step3: Set the video tampering area and sensitivity.
The sensitivity can be divided into three levels: Low,
Medium, and High.
Enable "Start Draw", and select the detection area by using
mouse.

49