HIKVISION DS-9500 Series User Manual page 46

User Manual of DS-9500 Series NVR
Step4: Tick box of Start Draw and draw an area on the image
by lift-pressing and holding the mouse. Double-click can
select full screen.
Step5: Select a sensitivity level for motion detection. Level 1
is the lowest, 6 is the highest.
Step6: Arm Schedule Setup
You may select one day in a week, or select several time
periods in one day. Then you may also select copy the settings
to whole week or to one day.
Note:
There are 8 time periods in one day.
Step7: Go back to Schedule Record page and click settings
button besides Record Time to enter Recording Schedule
menu.
Step8: Select one day in a week, and select All Day recording
if necessary. You may also set period recording by disable All
Day Recording; there are 8 time periods in one day. Then you
can select Motion Detection from the drop-down menu beside
the periods. Then you may also select copy the settings to
whole week or to one day.
Note:
(1) Please make sure that each time period is not overlapped.
(2)The valid time of motion detection recording is the
intersection of arm schedule and recoding schedule.
43