HIKVISION DS-9500 Series User Manual page 67

Hide thumbs Also See for DS-9500 Series:

Table of Contents

User Manual of DS-9500 Series NVR

Step 2: Edit the name of virtual disk, set the

capacity, select the VD init type and select the

array location.

Click the Create button to create the configured

virtual disk.

Note:

At least 100GB capacity must be

configured for each virtual disk.

It is recommended to select the foreground

initialization when the hard disk is used on the

NVR for the first time.

Three initialization types are selectable:

Initialization (Foreground): The foreground initialization usually takes long time, which depends on the HDD

capacity. During the foreground initialization, the virtual disk is not allowed to use.

Initialization (Background): The background initialization usually takes long time, which depends on the HDD

capacity. During the background initialization, the virtual disk is allowed to use.

Initialization (Fast): The fast initialization usually takes short time, which is not relevant to the HDD capacity.

Step 3: Return to the RAID Settings menu.

Click the Virtual Disk tab to enter the Virtual

Disk interface. The created virtual disk(s) will be

listed on the interface.

Table of Contents