Table of Contents
Advertisement
Step3: user can setup all channels with same parameters, tick off "all", then to do relevant setup.
Step4: click "default" button to resort default setting; click "apply" button to save the setting; click "exit" button to exit current interface.
②
Schedule
Step1: enter into system configuration schedule;
Step2: the setup steps of alarm out schedule are familiar with schedule; user can refer to 4.4.1 Schedule for details.
Note: the default schedule of motion detection is full-selected, that is, the color of schedule setting interface is blue.
③
Buzzer
Step1: enter into system configuration buzzer; (if here sets is off, all event without buzzer)
Step2: tick off Buzzer, set buzzer alarm hold time
3.6 Network configuration
Network configuration includes two submenus: network and network stream.
3.6.1 Network
Step1: enter into system configuration network configuration network; refer to Fig4-28:
Step2: HTTP port: the default value is 80. If the value changed, user needs to add the port number when typing IP address in IE address blank .i.e.
set HTTP port to 82, IP address: http://192.168.0.25, user needs to input that address:
Server port: communication port
There are 3 different types to connect internet, please select an appropriate type to fit your network environment.
1. STATIC (FIXED) IP: Input IP address, subnet mask, gateway and DNS server manually.
2. DHCP : Check the "Obtain IP address automatically", the device will acquire IP address, subnet mask, gateway and DNS service.
3. PPPoE : input the user name and password from ISP provider.
No matter which type you use, please click "Test" before you click "Apply" to make the setting work.
Fig 4-28 network configuration-network
22
http://192.168.0.25:82
into IE browser.
Hide quick links:
Advertisement
Table of Contents
