Signal Level Alarm - HIKVISION DS-9500 Series User Manual

User Manual of DS-9500 Series NVR
Alarm Linkages Description:
Linkage
Warning on Monitor
Audio Warning
Upload to Center
E-mail Linkage
Trigger Alarm Output

9.4.2 Signal Level Alarm

Step1: The same with the Step1 of Section 9.3.4 Alarm Recording.
Step2: The same with the Step2 of Section 9.3.4 Alarm Recording.
Step3: The same with the Step3 of Section 9.3.4 Alarm Recording.
Step4: The same with the Step4 of Section 9.3.4 Alarm Recording.
Step5: Set the alarm linkage for signal level and select alarm
output channel.
Step6: Set PTZ linkage for signal level alarm.
Note:
Alarm input can link PTZ of several channels, but
one channel can only link one option of preset, sequence and
pattern.
When the alarm signal is detected, the image of corresponding channel will pop out
as single screen.
Alarm triggers buzzer
Upload the alarm signal to the center, such as client software
When the alarm signal is detected, the client software will send the email to the
designated mailbox.
Trigger alarm output of the device; if the device is 9000 series, triggering alarm
output of IP channel can be selected as well.
47
Description