Channel Configuration; Channel Display Settings - HIKVISION DS-9500 Series User Manual

User Manual of DS-9500 Series NVR
Disk Group Management：
Select one disk and select one HDD Group you want it to be
shown as figure right.
Note:
NVR supports up to 16 HDD Groups.
HDD Property Settings:
Select one disk, and configure its property by selecting
Read-Write, Read-Only or redundant from drop-down menu,
shown as figure right.
Note:
Read-Write: Writing in or Read from this disk is allowed
when selecting this option.
Write-Only: Unable to write in this disk to protect existed
recordings from being overwritten when selecting this option.
Redundant: Redundant recording in this disk is allowed
when selecting this option.
HDD Group record channel:
Click "HDD Group attribute" button to enter setup page.
First select a HDD group and then tick channels you want to
record in this HDD group, and then click OK to finish
Note:
Recording the images of one channel in one HDD
group is recommended.

9.7 Channel Configuration

9.7.1 Channel Display Settings

54