Printing In The Ps3 Mode Problems; The Printer Does Not Print Correctly In The Postscript Mode - Epson AL-M8200 Series User Manual

AL-M8200/AL-M8100/AL-M7100 Series User's Guide
Cause
You may not be using the correct interface cable.
The emulation setting for the port may not be correct.
Note:
If a configuration status sheet does not print correctly, your printer may be damaged. Contact your dealer or a qualified
service representative.
The font cannot be printed
Cause
For Windows users, you may use the printer fonts
substituted for specified TrueType fonts.
The selected font is not supported by your printer.

Printing in the PS3 Mode Problems

The problems listed in this section are those that you may encounter when printing with the PostScript driver. All
procedural instructions refer to the PostScript printer driver.

The printer does not print correctly in the PostScript mode

Cause
The printer's emulation mode setting is incorrect.
The printer's emulation mode setting for the interface
that you are using is incorrect.
Troubleshooting
What to do
Use a cable that matches the specifications of the printer. Confirm
that there are not breaks in the cable.
If you are using the USB interface, use a cable that is compatible with
Hi-Speed USB.
Specify the emulation mode by using the printer's control panel
menus. See "Emulation Menu" on page
What to do
In the printer driver, choose the Print TrueType fonts as bitmap
check box in the Extended Settings dialog box.
Make sure that you have installed the correct font. See the Font Guide
for more information.
What to do
The printer is set to the Auto mode by default, so that it can
automatically determine the encoding used in the received print job
data and select the appropriate emulation mode. However, there are
situations where the printer cannot select the correct emulation
mode. In this case, it must be set manually to PS3.
Set the emulation mode through the SelecType Emulation Menu
on the printer. See "Emulation Menu" on page
The emulation mode can be set individually for each interface which
receives print job data. Set the emulation mode for the interface you
are using to PS3.
Set the emulation mode through the SelecType Emulation Menu
on the printer. See "Emulation Menu" on page
72
26.
26.
26.