Replacing Consumable Products; Precautions During Replacement; Cleaning The Printer; Cleaning The Inner Roller - Epson AL-M8200 Series User Manual

AL-M8200/AL-M8100/AL-M7100 Series User's Guide
Replacing Consumable
Products

Precautions during replacement

Always observe the following handling precautions
when replacing consumable products.
For details about the replacements, see the instructions
that come with the consumable products.
!
Caution:
❏ Be careful not to touch the fuser, which is
marked with a caution label, or the
surrounding areas. If the printer has been in
use, the fuser and surrounding areas may be
very hot.
❏ Do not dispose of used consumable products in
fire, as they may explode and cause injury.
Dispose of them according to local regulations.
❏ Provide enough space for the replacement
procedure. You will have to open some parts (such
as the printer cover) of the printer when you are

replacing consumable products.

❏ Do not install used consumable products that reach
end of service life into the printer.
For details about the handling precautions, see
"Handling the consumable products" on page
If a consumable product reaches the end of its service
life, the printer displays the following message on the
LCD panel or the window of EPSON Status Monitor.
LCD Panel Message
Replace Toner Cart and Waste Toner Box

Cleaning the Printer

The printer needs only minimal cleaning to keep it in
good condition.
If the printer's outer case is dirty or dusty, turn off the
printer and clean it with a soft, clean cloth moistened
with a mild detergent.
Troubleshooting
c
Important:
Never use alcohol or paint thinner to clean the
printer cover. These chemicals can damage the
components and the case. Be careful not to get
water onto the printer mechanism or any electrical
components.

Cleaning the inner roller

A
Turn the printer off and unplug the power cord.
B
Close the MP tray.
C
Open cover A, then cover F.
8.
D
Lift the handle D to unlock the developer unit.
77