Status And Error Messages; Canceling Printing; Printing In The Postscript 3 Mode Problems; The Printer Does Not Print Correctly In The Postscript Mode - Epson WorkForce AL-C500 Series User Manual

If About is displayed in the shortcut menu that appears, click it. If a message box with the words
"Unidrv Printer Driver" appears, you must reinstall the printer software as described in the Setup
Guide. If About is not displayed, the printer software has been installed correctly.
Note:
For Windows Vista, Vista x64, XP, XP x64, Server 2003, or Server 2003 x64, if the software installation
dialog box appears during the installation process, click Continue Anyway. If you click STOP
Installation, you will have to install the printer software again.

Status and Error Messages

You can see the printer's status and error messages on the LCD panel. For more information, see
"Status and Error Messages" on page 90.

Canceling Printing

Press the W Pause/Cancel button on the printer's control panel.
To cancel a print job before it is sent from your computer, see "Cancelling a Print Job" on page 41.

Printing in the PostScript 3 Mode Problems

The problems listed in this section are those that you may encounter when printing with the PostScript
driver. All procedural instructions refer to the PostScript printer driver.

The printer does not print correctly in the PostScript mode

Cause
The printer's emulation mode setting is incorrect.
What to do
The printer is set to the Auto mode by default, so that it can
automatically determine the encoding used in the received print
job data and select the appropriate emulation mode. However,
there are situations where the printer cannot select the correct
emulation mode. In this case, it must be set manually to PS3.
Set the emulation mode through the SelecType Emulation Menu
on the printer. See "Emulation Menu" on page 66.
AL-C500 Series User's Guide
Troubleshooting 180