Entering The Sleep Mode Automatically; Changing The Printer Driver's Default Settings (For Administrators) - Epson AL-M8200 Series User Manual

AL-M8200/AL-M8100/AL-M7100 Series User's Guide
Entering the sleep mode
automatically
Setting the time-to-sleep time
Selecting a value from the time-to-sleep options
in the Energy Saver Menu.
Item Value
Time to
Disable (default)
Sleep(Auto)
Time to Sleep 1 minute by default, or you can select a
value. For the values, see
Menu" on page
To make a weekly sleep schedule, see
sleep schedule" on page 53.
Selecting the value (time) which is calculated
from the printer's operation history
Item Value
Time to Enable
Sleep(Auto)
Time to Sleep
To make a weekly sleep schedule, see
sleep schedule" on page 53.
Making a weekly sleep schedule
This section shows an image of a weekly sleep schedule.
See "Energy Saver Menu" on page 21
items.
Use EpsonNet Config with a web browser for these
settings. See the Network Guide for the procedure to
access EpsonNet Config with a web browser.
Note:
Changing the settings for Time to Sleep(Auto),
Time to Sleep, and Sleep Schedule may affect the
service life of the fuser unit (the maintenance unit or the
printer) or printer power consumption. See
Adjust Menu" on page 86
setting that controls the fuser unit when the printer is
ready to print.
Printing Tasks
"Energy Saver
21.
"Making a weekly
-
"Making a weekly
for the setting
"Printer
for details on the Eco Fuser
Example of one day sleep schedule:
The printer is set to immediately enter the sleep mode
during the time in shaded areas.
Example of one week sleep schedule:
Note:
❏ If Deep Sleep Mode is set to On (default), the
printer enters deep sleep mode and consumes less
power.
❏ The printer cannot enter the deep sleep mode under
the following conditions:
- MS Network in the Network Menu is set to Off
(default).
❏ The printer may not enter the deep sleep mode
immediately under the following conditions:
- A network communication has been planned to
start within a minute.
- Bonjour is set to On (default) and within 10
minutes after the printer has been turned on.
Changing the printer
driver's default settings
(for administrators)
Note:
❏ The explanations below use Windows 7 as an
example.
❏ Power User or higher privileges are required to
change the printer driver's default settings.
53