Epson AL-M8200 Series User Manual page 87

AL-M8200/AL-M8100/AL-M7100 Series User's Guide
Item
020 Special
051 Feed Offset
052 Scan Offset
053 Feed Offset2
054 Scan Offset2
055 Feed Reg1 MP
059 Feed Reg1 C1
063 Feed Reg1 C2
067 Feed Reg1 C3
071 Feed Reg1 C4
*
075 Feed Reg1 C5
* AL-M8200/AL-M8100 Series
only
Appendix
Explanation
Adjusts the print quality for special paper according to the paper type.
Settings (default in bold):
0: Thin paper
1: Plain paper
2: Semi-thick paper
3: Letterhead
4: Thick paper
5: Extra-thick paper
6: Super-thick paper
Do this adjustment after you have eliminated the variation between the paper sources by
055/059/063/067/071/075
This function adjusts the vertical position at which to start printing. The position moves
lower on the sheet of paper as the value increases. This setting is used when doing
single-sided printing or printing on the back side of the sheet of paper for duplex printing.
Settings (default in bold):
-3.5 ... 0.0 ... 3.5 mm in 0.5 mm increments
Do this adjustment after you have eliminated the variation between the paper sources by
056/060/064/068/072/076.
This function adjusts the horizontal position at which to start printing. The position moves
to the right of the sheet of paper as the value increases. This setting is used when doing
single-sided printing or printing on the back side of the sheet of paper for duplex printing.
Settings (default in bold):
-3.5 ... 0.0 ... 3.5 mm in 0.5 mm increments
Do this adjustment after you have eliminated the variation between the paper sources by
057/061/065/069/073/077.
This function adjusts the vertical position at which to start printing. The position moves
lower on the sheet of paper as the value increases. This setting is used when printing on
the front side of the sheet of paper for duplex printing.
Settings (default in bold):
-3.5 ... 0.0 ... 3.5 mm in 0.5 mm increments
Do this adjustment after you have eliminated the variation between the paper sources by
058/062/066/070/074/078.
This function adjusts the horizontal position at which to start printing. The position moves
to the right of the sheet of paper as the value increases. This setting is used when printing
on the front side of the sheet of paper for duplex printing.
Settings (default in bold):
-3.5 ... 0.0 ... 3.5 mm in 0.5 mm increments
Adjusts the vertical position at which to start printing and eliminate the variation between
the paper sources. The position moves lower on the sheet of paper as the value increases.
This setting is used when feeding paper for single-sided printing or printing on the back
side of the sheet of paper for duplex printing.
Settings (default in bold):
-3.5 ... 0.0 ... 3.5 mm in 0.5 mm increments
87