Table of Contents
Advertisement
Checking printer software installation
When using Windows, you must follow the steps in the Setup Guide packed with the printer to install
the printer software. Otherwise, Microsoft's Universal driver may be installed instead. To check if the
Universal driver has been installed, follow the steps below.
1. Open the Printers folder, then right-click the icon of your printer.
2. Click Printing Preferences on the shortcut menu that appears, then right-click anywhere in the
driver.
If About is displayed in the shortcut menu that appears, click it. If a message box with the words
"Unidrv Printer Driver" appears, you must reinstall the printer software as described in the Setup
Guide. If About is not displayed, the printer software has been installed correctly.
Note:
For Windows Vista, Vista x64, XP, XP x64, Server 2003, or Server 2003 x64, if the software installation
dialog box appears during the installation process, click Continue Anyway. If you click STOP
Installation, you will have to install the printer software again.
Status and Error Messages
You can see the printer's status and error messages on the LCD panel. For more information, see
"Status and Error Messages" on page 84.
Canceling Printing
To cancel a print job on the printer's control panel, see "Canceling Printing" on page 96.
To cancel a print job before it is sent from your computer, see "Cancelling a Print Job" on page 40.
Printing in the PostScript 3 Mode Problems
The problems listed in this section are those that you may encounter when printing with the PostScript
driver. All procedural instructions refer to the PostScript printer driver.
Epson AcuLaser M7000 Series
Troubleshooting
User's Guide
160
Advertisement
Table of Contents
