Troubleshooting; Checking Printer Status; Status And Error Messages On The Control Panel - Epson AL-M8200 Series User Manual

AL-M8200/AL-M8100/AL-M7100 Series User's Guide

Troubleshooting

Checking Printer Status

Status and error messages on the
control panel
This section describes the messages and the meaning of
the messages that appear on the LCD panel.
When the mark is displayed at the right of the warning
message, multiple warnings have occurred. Pressing the
u Up or d Down buttons displays the warnings.
Note:
❏ If l Press for help is displayed on the LCD
panel, press the l Left button to show the help.
Then press the d Down button for next step, the
u Up button for previous step, or l Left button to
close the help.
❏ To clear a warning message, select Reset Menu in
Common Settings from the control panel, then
select Clear Warning. See
control panel menus" on page 15
Adjusting Printer
Wait a few minutes. Do not open or close the covers, or
turn off the printer until this message disappears.
Bookmark Failed
The selected menu cannot be registered as a bookmark.
Some menus cannot be registered as bookmarks.
Bookmark Registered
The selected menu is registered as a bookmark.
Canceling All Job
The printer is canceling all print jobs in the printer
memory, including jobs the printer is currently
receiving or printing. This message appears when
Cancel All Jobs is selected on the control panel.
Canceling Job
Troubleshooting
"How to access the
for instructions.
60
The printer is canceling the specified print job and the
current print job. This message appears when Cancel
Job is selected after you specify the file to be canceled on
the control panel.
Can't Print
The print data is deleted because it is incorrect.
Make sure the appropriate paper size and printer driver
are used.
Can't Print Duplex
The printer has encountered problems during duplex
printing. Make sure you are using an appropriate type
and size of paper for the duplex printing. The problem
could also be a result of incorrect settings for the paper
source you are using. Pressing the OK button will print
the rest of the print job on only one side of the paper. To
cancel the print job, see "Cancelling a Print Job" on
page 55.
Can't Use Bookmark
The registered menu cannot be used because the menu
is disabled by changing any settings after registered the
menu in bookmark.
Check Cassette Dial tttt ssss
Confirm that the size of the paper loaded in cassette tttt
matches ssss on the paper size setting dial in the cassette.
Check Paper Size
The size of paper loaded in the printer is not available for
the printer. Check to see if the correct size of paper is
loaded in the specified paper source.
To clear this warning message, select Clear Warning
from the control panel's Reset Menu.
Check Media Type
The paper loaded in the printer does not match the
paper type setting in the printer driver. Paper that
matches only the paper size setting will be used for
printing.
To clear this warning message, select Clear Warning
from the control panel's Reset Menu.
Check Paper Size