Emulation Menu; Pcl Menu - Epson AL-M8200 Series User Manual

AL-M8200/AL-M8100/AL-M7100 Series User's Guide
Item
Left Offset
T Offset B
L Offset B
Low Speed Mode

Emulation Menu

Item
USB/Network

PCL Menu

Item
FontSource
Getting to Know Your Printer
Explanation
Makes fine adjustments to the horizontal printing position of the page.
c
Important:
Make sure that the printed image does not extend beyond the edge of the paper.
Otherwise, you may damage the printer.
Settings (default in bold):
-150.0 ... 0.0 ... 150.0 mm in 0.5 mm increments
Adjusts the vertical printing position on the back of the paper when printing on both
sides. Use this if the printout on the back is not where you expected.
Settings (default in bold):
-150.0 ... 0.0 ... 150.0 mm in 0.5 mm increments
Adjusts the horizontal printing position on the back of the paper when printing on both
sides. Use this if the printout on the back is not where you expected.
Settings (default in bold):
-150.0 ... 0.0 ... 150.0 mm in 0.5 mm increments
When this mode is selected, the printing speed is slow.
The slow printing is expected the following effects:
- improves the fixing failure.
- improves the quality of the barcode printing.
- lowers the mechanical sounds.
- reduces feeding problems of the thick paper.
Settings (default in bold):
Off, On
Explanation
Specifies emulation mode for each interface.
Settings (default in bold):
Auto, ESCP2, FX, I239X, PS3, PCL
Explanation
Sets the default font source.
Settings (default in bold):
*
Resident, Download
* Available only when downloaded fonts are available.
26