Installing The Postscript Printer Driver With Windows - Epson AL-M8200 Series User Manual

AL-M8200/AL-M8100/AL-M7100 Series User's Guide
Installing the PostScript printer
driver with Windows
To print in the PostScript mode, you will have to install
the printer driver. See the appropriate sections below for
installation instructions according to the interface that
you are using to print.
Installing the PS3 printer driver for
the USB interface
Note:
❏ Installing the printer software for Windows may
require administrator privileges. If you have
problems, ask your administrator for more
information.
❏ Turn off all virus protection programs before
installing the printer software.
A
Make sure that the printer is turned off. Insert the
printer Software Disc into your CD/DVD drive.
Note:
If your computer does not have a CD/DVD drive,
download the driver from the Epson website.
http://www.epson.eu/Support
B
Connect your computer to the printer with a USB
cable, then turn on the printer.
Note for Windows Vista users:
Without the Windows driver or the Adobe PS
driver, the display shows "Found New
Hardware." In this case, click Ask me again
later.
C
Select Devices and Printers, and click the Add a
printer button.
For Windows 8.1 or Windows 8, right-click the
bottom left corner of the screen in the desktop
style, select Control Panel, click View devices
and printers, then click Add a printer button.
For Windows Vista, Windows XP, or Windows
Server 2008/R2, click Start, point to Printer and
Faxes, and click Add a printer in the Printer
Tasks menu.
Uninstalling and Installing Software
D
E
F
(Europe)
G
H
I
Installing the PS3 printer driver for
the network interface
57
For Windows Server 2003, click Start, point to
Settings, and click Printers. Then double-click
the Add Printer icon.
The Add Printer Wizard appears.
Select Add a local printer.
For Windows XP or Windows Server 2003, click
Next to proceed the next screen, select Local
printer, then click Next.
Note:
Do not select the Automatically detect and
install my Plug and Play printer check box.
Select USB as the port the printer is connected to,
then click Next.
Click Have Disk and specify the following path
for the Software Disc. If your CD/DVD drive is
D:, the path will be D:\Driver\PostScript
\eppsnt.inf. Then click OK.
Note:
Change the drive letter as needed for your system.
Select the printer, then click Next.
Follow the on-screen instructions for the rest of
the installation.
When installation is done, click Finish.
Note:
❏ Set the network settings before installing the printer
driver. Refer to the Network Guide for your printer
for details.
❏ Turn off all virus protection programs before
installing the printer software.