Quick Print Jobmenu; Confidentialjobmenu; Common Settings - Epson AL-M8200 Series User Manual

AL-M8200/AL-M8100/AL-M7100 Series User's Guide
Machine Status
Item
Toner
Maintenance Unit Life
(AL-M8200/AL-M8100 Series
only)
Total Pages

Quick Print JobMenu

This menu allows you to print or delete print jobs that were stored in the printer's memory using the Quick Print Job
feature (Re-Print Job, Verify Job) of the printer driver's Reserve Job function. For instructions on using this menu,
see"Using the Reserve Job function" on page

ConfidentialJobMenu

This menu allows you to print or delete print jobs stored in the printer's memory using the Confidential Job feature of
the printer driver's Reserve Job function. You need to enter the correct password to access this data. For instructions
on using this menu, see "Using the Reserve Job function" on page

Common Settings

Setup Menu
Item
I/F Time Out
Out Bin
MP Tray Priority
Manual Feed
Getting to Know Your Printer
Explanation
The number of asterisks (*) between "E" and "F" indicates the remaining service lives of
replacement parts. If a non-genuine replacement part is used, "?" is displayed instead of
the indicator.
Displays the total number of pages printed by the printer.
50.
Explanation
Specifies the length of the time, in seconds, before a time out when interfaces are being
switched automatically. The time before a time out occurs is the length of time from the
point when no data is being received from an interface until the point of switching the
interface. If the printer has a print job when switching the interface, the printer prints the
print job.
Settings (default in bold):
0, 5 ... 60 ... 300 in increments of 1
Specifies the output tray. Select Face-up to output paper to the optional face-up tray.
Settings (default in bold):
Face-down, Face-up
This setting determines whether the MP tray has the highest or lowest priority when Auto
is selected as the Paper Source setting in the printer driver. When Normal (default) is
selected as the MP Tray Priority, the MP tray has the highest priority as the paper
source. If you select Last, the MP tray has the lowest priority.
Allows you to select the manual feed mode for the MP tray.
Settings (default in bold):
Off, 1st Page, EachPage
17
50.