Configuring Tray Settings - Xerox WorkCentre 6605 User Manual

Installation and Setup

Configuring Tray Settings

Use this menu to configure the paper trays for the paper size and type, set custom sizes, and turn the
display prompts on and off.
To configure the tray settings:
1. At the printer control panel, press the Machine Status button.
Touch the Tools>Tray Management>Tray Settings.
2.
3. To configure the Bypass Tray settings:
a. Touch Bypass.
b. To have the printer prompt you to set the paper type and size when paper is loaded, select
Display Tray Prompt.
To use the paper size and type from the print driver, select Use Driver Settings for Print Job.
c.
d. To dedicate the Bypass Tray for a paper size and type, clear Display Tray Prompt and User
Driver Settings for Print Job.
• To select a paper or envelope size, touch Size, touch the Up or Down arrows to navigate,
touch a size, then touch Size again.
• To select a paper type, touch Type, touch the Up or Down arrows to navigate, touch a
paper type, then touch Type again.
e. Touch OK.
4. To configure a paper tray:
Touch Tray 1 or Tray 2.
a.
b. To have the printer prompt you to set the paper type and size when paper is loaded, select
Display Tray Prompt.
• To select a paper or envelope size, touch Size, touch the Up or Down arrows to navigate,
touch a size, then touch Size again.
• To select a paper type from the list, touch Type, touch the Up or Down arrows to navigate,
touch a type, then touch Type again.
c. Touch OK.
Touch the Back arrow to return to the previous menu, or press the Services Home button to return
5.
to Service Home.
®
68 Xerox WorkCentre
User Guide
®
6605 Color Multifunction Printer