Label And Envelope Misfeeds - Xerox WorkCentre 6605 User Manual

Troubleshooting

Label and Envelope Misfeeds

Probable Causes
The label sheet is facing the wrong way in the
tray.
Envelopes are loaded incorrectly.
No. 10, DL, and Monarch envelopes are
wrinkling.
Paper Jam Message Stays On
Probable Causes
Some paper remains jammed in the printer.
One of the printer doors is open.
Note: Check for, and remove, torn pieces of paper in the paper path.
Jams During Automatic 2-Sided Printing
Probable Causes
Using paper of the wrong size, thickness, or
type.
Paper is loaded in the wrong tray.
Tray is loaded with mixed paper.
®
254 Xerox WorkCentre
User Guide
Solutions
• Load label sheets according to the instructions from the
manufacturer. Load labels only in the Bypass Tray, face up and
with the top going into the printer.
• Load No. 10, DL, and Monarch envelopes in the trays with the
print side up, flaps closed, flap-side down and to the right. Load
them with the short edge leading into the printer.
• Load C5 envelopes with the print side up, flaps open and facing
away from the printer.
To prevent wrinkling on No. 10, DL, C5, or Monarch envelopes, load
them print side up, flaps open and facing away from the printer.
Note:
specify landscape orientation in the print driver.
Solutions
Recheck the media path and make sure that you have removed all
of the jammed paper.
Check the doors on the printer. Close any door that is open.
Solutions
Use paper of the correct size, thickness, or type. For details, see
Supported Paper Sizes for Automatic 2-Sided Printing
The paper must be loaded in the correct tray. For details, see
Supported Paper
Load the tray with only one type and size of paper.
®
6605 Color Multifunction Printer
When you load envelopes long-edge feed, ensure that you
on page 118.
on page 121.