Configuring The Timers - Xerox WorkCentre 6605 User Manual

Installation and Setup
Setting the Auto Log Print
At the printer control panel, press the Machine Status button.
1.
2. Touch Tools>Admin Settings.
Touch System Settings, then touch General.
3.
4. Touch Auto Log Print.
To print a job history log after every 20 print jobs automatically, touch Auto Log Print.
5.
6. Touch OK.
7. At the Restart System prompt, touch Close.

Configuring the Timers

Use the Timers menu to set the timeouts for the control panel touch screen, for faults, and for jobs being
sent to the printer.
To configure the timers:
1. At the printer control panel, press the Machine Status button.
2. Touch Tools>Admin Settings.
Touch System Settings>Timers.
3.
4. To set the delay before the control panel times out, touch Control Panel, touch the delay you want,
then touch OK.
5. To set how long the printer waits before canceling a print job that stops abnormally:
Touch Fault Timeout>On.
a.
b. Use the keypad minutes to enter a delay time. The range is 3-- - 300 seconds.
c. Touch OK.
6. To set how long the printer waits for data to arrive from a computer:
a. Touch Job Timeout>On.
b. Use the keypad to enter a delay time. The range is 5-- - 300 seconds.
c. Touch OK.
7. To return to the System Settings, touch the Back arrow. To return to the Services Home menu, press
the Services Home button.
®
66 Xerox WorkCentre
User Guide
®
6605 Color Multifunction Printer