Xerox WorkCentre 6605 User Manual page 261

Symptom
Colors are blurry or there is white
area around objects.
Blotchy or mottled images.
Spots or lines appear at regular
intervals on the prints.
Probable Causes
Color-to-color alignment is not
correct.
The paper is too light or too thin. Choose a different paper type at the control
The paper is damp.
The humidity is too high.
One or more of the components
in the paper path is marking the
paper.
®
Xerox
Solutions
Perform an automatic color registration
adjustment. For details, see
Registration on page 219.
panel, in the application, and in the printer
driver.
Replace the paper.
Reduce the humidity in the room or move the
printer to a new location.
To determine the cause, measure the
distance between the print defects.
• 75.3 mm (3 in.) - Imaging Unit
• 28.3 mm (1.1 in.) - Imaging Unit
• 31.1 mm (1.2 in.) - Imaging Unit
• 32.3 mm (1.3 in.) - Imaging Unit
• 25.1 mm (1 in.) - Transfer Belt
• 56.5 mm (2.2 in.) - Transfer Roller
• 82.3 mm (3.2 in.) - Fuser
If the repeating defects match one of these
distances, replace that item.
®
WorkCentre 6605 Color Multifunction Printer
Troubleshooting
Color
261
User Guide