Xerox WorkCentre 6605 User Manual page 54

Installation and Setup
11. Using the keypad, enter the address as X.X.X.X, where X is a number from 0-- - 255:
− To clear an existing number from a cell, press Clear.
To enter a one or two-digit number, to advance to the next cell, touch the Right arrow.
−
When you enter the third digit of a three-digit number, the cursor automatically advances to
the next cell.
− After entering the number in the last cell, touch OK.
12. At the Restart System prompt, touch Close.
13. Touch Gateway Address.
14. Using the keypad, enter the address as X.X.X.X, where X is a number from 0-- - 255:
To clear an existing number from a cell, press Clear.
−
− To enter a one or two-digit number, to advance to the next cell, touch the Right arrow.
When you enter the third digit of a three-digit number, the cursor automatically advances to
the next cell.
After entering the number in the last cell, touch OK.
−
15. At the Restart System prompt, touch Close.
16. Turn off the printer, then turn it on again.
See also:
Online Support Assistant at:
®
54 Xerox WorkCentre
User Guide
www.xerox.com/office/WC6605support
®
6605 Color Multifunction Printer