Table of Contents
Advertisement
Appendix G: Interface
Figure G.5. Displays groups
1.
Open the Displays pane and select the projector or screens the position
or parameters of which you wish to modify. (See Figure G.5, Displays
groups".)
Selecting a display (either in the Displays pane or in a Viewport) causes
the Properties panel to show the parameters of the selected display.
2.
Edit the parameters of the display, such as its x, y, and z coordinates,
lens shift and throw ratio (for projectors), or resolution.
G.2.1
Display groups
The displays created to simulate real-world projector and screen setups appear as Pro-
jector Groups or Screen Groups in the Displays pane. Groups can be used to organize
your displays for ease-of-use.
Barco Pn: 60600320
Barco Media Server XHD-Series User Guide
93
Advertisement
Table of Contents
