Table of Contents
Advertisement
Section 2: Installation
Figure 2.14. Restore Error
2.9.2
Full System Restore
The procedure for a Full System Restore is nearly the same as the procedure for a System
Restore. This not only restores the application, software licenses, and settings on the
C: drive, but it erases any data on the D: drive, restoring the system to its original con-
dition.
1.
Plug the USB Recovery drive into one of the external USB 3.0 ports on
the Barco Media Server.
The Barco USB Recovery drive is a USB 3.0 device; you may reduce
recovery time by using this drive in a USB 3.0 port.
2.
Right-click the Windows icon
screen to restart.
As the system restarts, it displays the Barco logo screen.
3.
Press and hold the F8 key to summon the Select Boot Device screen.
4.
Select the USB Recovery drive (STT ST3U16SSPS (15000MB)).
Use the up and down arrow keys on your keyboard, or use your mouse
to make selections.
After the system restarts, the Restore application displays the Barco
Media Server Validation screen.
5.
Allow the System Restore menu to load.
Barco Pn: 60600320
Barco Media Server XHD-Series User Guide
at the lower left-hand corner of the
39
Advertisement
Table of Contents
