Table of Contents
Advertisement
Barco Media Server XHD-Series User Guide
General installation instructions
• Do not place this unit on an unstable cart, stand, or table. The unit may
fall, causing serious damage to it.
• Do not use this unit near water.
• Do not use any power cords other than the one supplied with your unit.
While appearing to be similar, other power cords have not been safety
tested at the factory and must not be used to power the unit. For a re-
placement power cord, contact your dealer.
• Slots and openings in the cabinet and the sides are provided for ventila-
tion; to ensure reliable operation of the unit and to protect it from over-
heating, these openings must not be blocked or covered. The openings
should never be blocked by placing the product on a bed, sofa, rug, or
other similar surface. This product should never be placed near or over
a radiator or heat register. This unit should not be placed in a built-in
installation or enclosure unless proper ventilation is provided.
• The maximum recommended ambient temperature for this equipment
is 40°C.
• When using the unit in a multi-unit rack assembly or closed assembly,
the ambient temperature inside the assembly may not exceed the max-
imum rated ambient temperature.
• When installed in a rack, the installation should be such that the amount
of air flow required for safe operation of the equipment is not comprom-
ised. The mounting of the equipment should be such that no hazardous
condition is achieved due to uneven mechanical loading.
1.3.4
Additional information
Servicing
Barco Media Servers do not require any servicing or regular maintenance work.
Cleaning
Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol
cleaners.
Unpacking of devices
For unpacking, follow the instructions and advice indicated on the outside of the
packaging!
18
Section 1: Introduction
Barco Pn: 60600320
Advertisement
Table of Contents
