Table of Contents
Advertisement
Section 2: Installation
This chapter gives instructions on how to install and run both the hardware and software
of the Barco Media Server, powered by X-Agora.
2.1
Installation requirements
2.1.1
Disconnect device
Where a disconnect device is not incorporated in the equipment, or where the plug on
the power supply cord is intended to serve as the disconnect device:
• for PERMANENTLY CONNECTED EQUIPMENT, a readily accessible
disconnect device shall be incorporated external to the equipment.
• for PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near
the equipment and shall be easily accessible.
2.1.2
Barco Media Server Windows
This version of the Barco Media Server is based on Microsoft
dustry Pro and must be at least version 01.06.00.
Verify that the Barco Media Server is loaded with the latest Windows image available
on the Barco website. Refer to Restore (p.35) for more information about upgrading the
Barco Media Server Windows image.
2.1.3
X-Agora GUI
The X-Agora GUI software must be at least Version 2.2.000.
Barco Pn: 60600320
Warning
Let the Barco Media Server acclimate to the ambient temperature after
unpacking. Ensure that the humidity is within the specification. Neglecting
this may result in startup failure of the device.
®
image
Barco Media Server XHD-Series User Guide
®
Windows
®
8.1 EMB In-
25
Advertisement
Table of Contents
