Table of Contents
Advertisement
Section 2: Installation
2.9.3
Clearing CMOS
If the Barco Media Server hangs or fails to boot after any change to the BIOS settings,
press the clear CMOS button to clear the CMOS and reset the motherboard to its default
value.
The clear CMOS button is a small red button labelled CLR_CMOS, located near the
front end of the PCIe 3.0 x16_4 expansion slot. (In the XHD-402 and XHD-404 media
servers, this slot holds the video out card. In the XHD-200 and XHD-400 media servers,
this slot is empty.)
!
Barco Pn: 60600320
Caution
Do not press the CLR_CMOS button during a System Restore, because this
will interrupt the restore operation.
Barco Media Server XHD-Series User Guide
41
Advertisement
Table of Contents
