Settings Pane - Barco XHD-Series User Manual

Barco Media Server XHD-Series User Guide
Figure G.21. SMPTE signal quality gauge
In the Output s layout you should see the SMPTE signal quality gauge
moving. If you don't see anything, it means that either the signal is too
dim or the chosen audio device has to be changed.
G.10

Settings pane

You can access the Settings pane from the Window tab on the Menu bar at the top of
the screen.
110
Note
You must launch the master player to see any effect. If the
master player is not running, the Timeline does not react
to the SMPTE signal. Running only the designer does not
cause the signal quality gauge to react to the SMPTE signal,
even if the master player is set to run on the same machine.
Appendix G: Interface
Barco Pn: 60600320