Table of Contents
Advertisement
Section 2: Installation
2.
The video output card can handle two DisplayPort-to-DVI conversions
on its own; for these conversions you may use the passive DisplayPort-
to-DVI adapters.
3.
The USB System Restore drive contains the user guide and the recovery
software. To restore the system using the USB System Restore drive,
see Restore (p.35).
2.2.4
Mechanical check
Confirm that there are no broken parts and that the unit is free of dents or scratches. If
you find broken parts, dents, or scratches, notify your Barco sales representative as soon
as possible.
2.3
Rack-mount procedure
The Barco Media Server chassis is designed to be rack mounted. Please note the following
important points:
• The Barco Media Server is 4RU in height.
• The maximum ambient operating temperature is 40° C.
• Leave sufficient front and rear space to ensure that airflow through the
Barco Media Server is not restricted.
• Distribute the units evenly, when installing equipment in a rack, to
prevent hazardous conditions that may be created by uneven weight
distribution.
• Connect the Barco Media Server only to a properly rated supply circuit.
• Maintain reliable grounding (earthing) of rack-mounted equipment.
• Mount the Barco Media Server from the front rack ears, using four rack
screws (not supplied).
(Threads may be metric or otherwise, depending upon the rack type.)
Barco Pn: 60600320
a.
If you wish to connect to more than two DVI devices,
you must use the active DisplayPort-to-DVI adapters
for the any conversions beyond the first two.
b.
To get all four outputs, connect the passive adapters
to ports 1 and 2, and connect the active adapters to
ports 3 and 4.
Barco Media Server XHD-Series User Guide
27
Advertisement
Table of Contents
