Table of Contents
Advertisement
Barco Media Server XHD-Series User Guide
9.
Send the resulting .WibuCmRac file to Barco.
2.8
Shutdown and restart
The Barco Media Server can be shut down and restarted from Windows or by means
of the hardware power switches on the front and rear panels of the Barco Media Server
box.
2.8.1
Software shutdown
After saving your work and closing X-Agora, you can shut down the Barco Media
Server through Windows.
1.
Right-click the Windows icon
2.
Hover the cursor over the Shut down or sign out option in the pop-up
menu.
3.
Select Shut down or Restart.
Figure 2.8. Windows shutdown menu
2.8.2
Hardware shutdown
The Barco Media Server box can be powered down by means of the power switch, the
reset button, or the master power switch. Only the power switch performs a shutdown.
Hardware shutdown options
• Press the power switch on the front panel to shut down the Barco Media
Server.
34
Note
X-Agora always opens with the most recently saved data. Remember always
to exit X-Agora before shutting down or restarting the Barco Media Server.
Upon exiting, X-Agora prompts you to save your work. If you do not save
your work in X-Agora before shutting down or restarting the Barco Media
Server, some of your work may be lost.
Section 2: Installation
at the far-left end of the Taskbar.
Barco Pn: 60600320
Advertisement
Table of Contents
