Barco Media Server XHD-Series User Guide
Figure 2.14. Barco Media Server Full System Restore Menu
7.
Select Confirm, and the Restore begins.
8.
Allow the Restore to run.
The Restore process takes between 10 and 30 minutes. The system
displays status throughout the Restore.
Once the Restore has reached this point (Applying the main volume),
the Barco Media Server automatically restarts.
9.
Allow a few minutes for the Barco Media Server to reconfigure.
2.9.3
Clearing CMOS
If the Barco Media Server hangs or fails to boot after any change to the BIOS settings,
press the clear CMOS button to clear the CMOS and reset the motherboard to its default
value.
The clear CMOS button is a small red button labelled CLR_CMOS, located near the
front end of the PCIe 3.0 x16_4 expansion slot. (In the XHD-402 and XHD-404 media
servers, this slot holds the video out card. In the XHD-200 and XHD-400 media servers,
this slot is empty.)
!
42
Caution
Do not press the CLR_CMOS button during a System Restore, because this
will interrupt the restore operation.
Section 2: Installation
Barco Pn: 60600320